Basic Knowledge of Software System

Introduction of software: 

The software is made for large-area laser machine, particularly for high-speed engraving and cutting. The following is the main features and functions of this software. A、It can support AI, BMP, PLT, DST embroidery software) and DXF etc. B、After graphics input, you can  do some  simple editing (change the size, circumrotate and copy etc.). C、Data of different layers can be  output respectively. Power, speed and mode (engrave and cut etc.) of each layer can be set respectively. All the parameters will be  save d automatically. D、Graphics can be engraved; Vector graph can be drawn, cut and engraved; precise level can be set up freely. E、Support array output and the software can calculate the number of data to cover the material. Whole processing procedure can be simulated on screen. The original point can be set anywhere to make processing conveniently. F , When process is going on, it can be controlled by “Pause” and “Continue”. All output process can be controlled on the interface of machine. G、When output, “process along dialog box” can make feeding and location easier. H、Engraving speed can reach to 1500mm/s, cutting speed can reach to 500mm/s, engraving precision can reach to 0.1mm. I、360 degree grade engraving. The grade can be set freely. J、Mass graphics(›15M) can be calculated rapidly. K、When the speed changes, the power intensity will change     automatically. It can insure the process depth is constant. L、Excellent optimized-path and path definition. M、When cutting, you can add assistant lines. This can make the juncture smooth and output quality is  increased. Redsail Laser machine user manual N、The particular “part process” function can process from broken point. If the power is cut off, the machine will not produce waster.More